The Current Position:Home>>Products>>Content

Sand Making Machine (Vertical Shaft Impact Crusher)


1、Introduction Of Sand Making Machine (Vertical Shaft Impact Crusher)

 Sand Making Machine (namely PCL Vertical Shaft Impact Crusher) is of high-power and low-consumption, which is designed depending on several year's hard work and study of mechanical mining equipment. Sand Making Machine absorbed the advanced technology of the same products of Barmac Company of America, now is of the international level. Sand Making Machine plays an important role in crushing minerals into pieces. PCL Vertical shaft Impact Crusher is widely used in all kinds of mineral, cement, corhart, carborundum grain, glass raw material, machine making construction sand, stone stock and all kinds of metallurgy slag, especially carborundum, sintered bauxite, magnesite, and so on materials with features of very hard and anticorrosion. And Sand Making Machine is more productive than other kind of crushers.

2、Working Principle Of Sand Making Machine (Vertical Shaft Impact Crusher)

 Material falls into the fast rotating impellers from the top of machine and crushes with the material distributed around the impeller under the effect of high speed centrifugal force. After the impact with each other, the material is crushed between impeller and cabinet and is discharged from the bottom. It can cycle many times with the close circuit and the sizing device will control the granularity of finished products.

3、Characteristics Of Sand Making Machine (Vertical Shaft Impact Crusher)

 1. Simple structure and low operating cost;

 2. High crushing ratio with low consumption;

 3. Function of fine crushing and crude grinding;

 4. Slightly influenced by moisture content of material, and the max moisture content is about 8%;

 5. More suitable for crushing mid-hardness and high hardness materials;

 6. Cubic shape of final products, high density of piling up and low iron pollution;

 7. More wearable and easier maintenance;

 8. Low working noise (lower than 75 decibel) and light dust pollution..

4、Main Technical Parameters Of Sand Making Machine (Vertical Shaft Impact Crusher)

Model Rotate speed
 of impeller
Max feed size
(including motor)
PCL-600 2000-2600 30 2×30 5.6 10-30 2800×1550×2030
PCL-750 1600-2100 35 2×45 7.5 30-50 3300×1800×2440
PCL-900 1300-1700 40 2×55 12 50-80 3750×2120×2660
PCL-1050 1100-1450 45 2×110 16 70-120 4480×2450×2906
PCL-1250 950-1200 45 2×132 22 80-150 4563×2650×3176
PCL-1350 900-1200 50 2×160 26 120-200 5340×2940×3650
Hot ProductsJaw crusherEnergy-saving Ball millDrum Drier-Brick Machine
Technical Support MapXml