The Current Position:Home>>Products>>Content

Vibrating Feeder

vibrating feeder

1、Introduction Of Vibrating Feeder

 Vibrating Feeder (Vibratory feeder) is mainly used in feeding materials before coarse crushing. Our GZD series machine can put the block or granule materials from the material storage into the charging device in time evenly and continuously. Therefore, it can realize even feeding for crushers in sandstone production line and make rough screening of materials. The vibrating feeder is widely used to match the crushing and sieving equipments in many industries including metallurgy, coal mine, mineral dressing, building material, chemical, grinding, etc.

2、Working Principle Of Vibrating Feeder

 There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like para curve, then fall down. The materials will move forward on the slope surface of the feeder.

3、Feature Of Vibrating Feeder

 1.Smooth vibration

 2.Reliable working

 3.long-life, low noise, low power consumption

 4.Excellent performance, no flushing phenomenon of materials

 5.Easy maintenance and low operating cost.

4、Main Technical Parameters Of Vibrating Feeder

Speed of Spiral
Slope Power
Sand Return
500 8-15.5 6-11 32 12-18 Y1.1-6 1.9
750 4.5-10 11-24 65 12-18 Y3-6 2.7
1000 1.6-7.4 25-45 110 12-18 Y5.5-6 4.1
1200 5-7 50-80 155 12-18 Y7.5-6 7.5
1500 2.5-6 70-115 235 12-18 Y7.5-6 10.5
1800 2.5-6 100-190 310 12-18 Y11-6 17.1
2000 2.5-6 160-230 400 12-18 Y15-6 19.3
Hot ProductsJaw crusherEnergy-saving Ball millDrum Drier-Brick Machine
Technical Support MapXml